Jump: 1977-1979 1980-1984 1985-1989 1990-1994 1995-1999 2000-2004 2005-2009 2010-Present

2010 - Present

Shanti, N.O., Chen, V.W.L., Stock, S.R., De Carlo, F., Thornton, K, Faber, K.T., X-ray micro-computed tomography and tortuosity calculations of percolating pore networks. Acta Materialia 71, 126-135, (2014). doi:10.1016/j.actamat.2014.03.003

Simsek, G., Casadio, F., Colomban, Ph., Bellot-Gurlet, L., Faber, K.T., Zelleke, G., Milande, V., Moinet, E., On-site identification of early Böttger/Meissen red stoneware using portable XRF: 1. Body analysis. Journal of The American Ceramic Society 97, [9], 2745-2754, (2014). doi:10.1111/jace.13032

Faber, K.T., Small Volumes Create Super(elastic) Effects. Science 341, 1464-1465, (2013). doi:10.1126/science.1245097

Faber, K.T., Lara-Curzio, E., Emerging Opportunities in Ceramics: Reports from the 4th International Congress on Ceramics. International Journal of Applied Ceramic Technology 10, [3], 377-378, (2013). 10.1111/ijac.12089

Childers, A.E., Johnson, M.T., Ramirez-Rico, J., Faber, K.T., Modeling macro-sized, high aspect ratio through-hole filling by multi-component additive assisted copper electrodeposition. Journal of The Electrochemical Society 160, [12], D3093-D3102, (2013). doi:10.1149/2.018312jes

Ramirez-Rico, J., Stolzenburg, F., Almer, J., Routbort, D., Singh, D., Faber, K.T., In-situ imaging and strain determination during fracture in a SiC/SiC ceramic-matrix composite. Scripta Materialia 69, 497-500, (2013). doi:10.1016/j.scriptamat.2013.05.032

Johnson, M.T., Childers, A.E., Ramirez-Rico, J., Wang, H., Faber, K.T., Thermal conductivity of wood-derived graphite and copper-graphite composites produced via electrodeposition. Journal of Composites, Part A 53, 182-189, (2013). doi:10.1016/j.compositesa.2013.06.009

Johnson, M.T., Childers, A.E., de Carlo, F., Xiao, X., Faber, K.T., Wood-derived copper-graphite composites produced via additive-assisted electrodeposition. Composites Science and Technology 89, 61-68 (2013). doi:10.1016/j.compscitech.2013.09.010

Chen-Wiegart, Y.-C., Liu, Z., Faber, K.T., Barnett, S.A., Wang, J., 3D analysis of a LiCoO2-Li(Ni1/3Mn1/3Co1/31/3)O2 li-ion battery positive electrode using x-ray nano-tomography. Electrochemistry Communications 28, 127-130 (2013). doi:10.1016/j.elecom.2012.12.021

Liu, Z., Cronin, J.S., Chen-Wiegart, Y.-C., Wilson, J.R., Yakal-Kremski, K.J., Wang, J., Faber, K.T., Barnett, S.A. Three-dimensional morphological measurements of LiCoO2 and LiCoO2/ Li(Ni1/3Mn1/3Co1/31/3)O2 lithium-ion battery cathodes. Journal of Power Sources 227, 267-274 (2013). doi:10.1016/j.jpowsour.2012.11.043

Hsiung, C.-H., Pyzik, A.J., Gulsoy, E.B., de Carlo, F., Xiao, X., Faber, K.T., Impact of doping on the mechanical properties of acicular mullite, Journal of the European Ceramic Society 33, 1955-1965, (2013). doi:10.1016/j.jeurceramsoc.2013.02.006

Hsiung, C.-H., Pyzik, A.J., de Carlo, F., Xiao, X., Stock, S. R., Faber, K.T., Microstructure and mechanical properties of porous acicular mullite. Journal of the European Ceramic Society 33 (3), 503-513 (2013). doi:10.1016/j.jeurceramsoc.2012.09.017

Rohrer, G.S., Affatigato, M., Backhaus, M., Bordia, R.K., Chan, H.M., Curtarolo, S., Demkov, A., Eckstein, J.N., Faber, K.T., et al., Challenges in ceramic science: A report on the workshop on emerging research areas in ceramic science. Journal of the American Ceramic Society 95 (12), 3699-3712 (2012). doi:10.1111/jace.12033

Shanti, N.O., DeNolf, G.C., Shull, K.R., Faber, K.T., Liquid desiccant solvent extraction of alumina-filled theroreversible gels. Journal of the American Ceramic Society 95 (2), 509-514 (2012). doi:10.1111/j.1551-2916.2011.04884.x

Stolzenburg, F., Almer, J., Lee, K.N., Harder, B.J., Faber, K.T., Stresses in ytterbium silicate multilayer environmental barrier coatings. Advances in X-ray Analysis 55, Proceedings of the 2011 Denver X-ray Conference, ICDD.

Shanti, N.O., Bierschenk, D.M., Barnett, S.A., Faber, K.T., Direct lamination of SOFC anode support, anode, and electrolyte by sequential tape casting of thermoreversible gels. Journal of Power Sources 212, 43-46 (2012). doi:10.1016/j.jpowsour.2012.03.073

Harder, B.J., Ramírez-Rico, J., Almer, J.D., Lee, K.N., Faber, K.T., Chemical and mechanical consequences of environmental barrier coating exposure to CMAS. Journal of the American Ceramic Society 94 (SI), S178-S185 (2011). doi:10.1111/j.1551-2916.2011.04448.x

Johnson, M.T., Faber, K.T., Catalytic graphitization of three-dimensional wood-derived porous scaffolds. Journal of Materials Research 26 (1), 18-25 (2011). doi:10.1557/jmr.2010.88

Chen, Z., Suchech, S., Faber, K.T., A hierarchical study of the mechanical properties of gypsum. Journal of Materials Science 45 (16), 4444-4453 (2010). doi:10.1007/s10853-010-4527-z

Parfen'eva, L.S., Orlova, T.S., Kartenko, N.F., Sharenkova, N.V., Smirnov, B.I., Smirnov, I.A., Misiorek, H., Jezowski, Wilkes, T.E., Faber, K.T., Thermal conductivity of high-porosity biocarbon precursors of beech wood. Physics of the Solid State 52 (6), 1115-1122 (2010). doi:10.1134/S1063783410060028

Harder,B.J., Faber, K.T., Transformation kinetics in plasma-sprayed barium-and strontium-doped aluminosilicate. Scripta Materialia 62(5), 282-285 (2010). doi:10.1016/j.scriptamat.2009.11.019

Pappacena, K.E., Johnson, M.T., Faber, K.T., Processing of wood-derived copper-silicon carbide composites via electrodeposition. Composites Science and Technology 70 (3), 485-491 (2010). doi:10.1016/j.compscitech.2009.12.019

Pappacena, K.E., Johnson, M.T., Wang, H., Porter, W.D., Faber, K.T., Thermal properties of wood-derived coppor-silicon carbide composites. Composites Science and Technology 70 (3), 478-484 (2010). doi:10.1016/j.compscitech.2009.11.011

2005 - 2009

Seitz, M.E., Shull, K.R., Faber, K.T., Acrylic triblock copolymers for ceramic processing applications: rheological and green body properties. Journal of the American Ceramic Society 92 (7), 1519-1525 (2009). doi:10.1111/j.1551-2916.2009.03059.x

Wilkes, T.E., Harder, B.J., Almer, J.D., Faber, K.T., Load partitioning in honeycomb-like silicon carbide aluminum alloy composites. Acta Materialia 57 (20), 6234-6242 (2009). doi:10.1016/j.actamat.2009.08.050

Shanti, N.O., Hovis, D.B., Seitz, M.E., Montgomery, J.K., Baskin, D.M., Faber, K.T., Ceramic laminates by gelcasting. International Journal of Applied Ceramic Technology 6 (5), 593-606 (2009). doi:10.1111/j.1744-7402.2008.02312.x

Pappacena, K.E., Gentry, S.P., Wilkes, T.E., Johnson, M.T., Xie, S., Davis, A., Faber, K.T., Effect of pyrolyzation temperature on wood-derived carbon and silicon carbide materials. Journal of the European Ceramic Society 29 (14), 3069-3077 (2009). doi:10.1016/j.jeurceramsoc.2009.04.040

Harder, B.J., Almer, J., Lee, K.N., Faber, K.T., In-situ stress analysis of multilayer environmental barrier coatings. Powder Diffraction 24 (2), 94-98 (2009). doi:10.1154/1.3120602

Wilkes, T.E., Stock, S.R., de Carlo, F., Faber, K.T., X-ray micro-computed tomography of beech wood and biomorphic C, SiC, and Al/SiC composites. Philosophical Magazine 89 (17), 1373-1389 (2009). doi:10.1080/14786430902956457

Harder, B.J., Almer, J., Weyant, C.M., Kee, K.N., Faber, K.T., Residual stress analysis of multilayer environmental barrier coatings. Journal of the American Ceramic Society 92 (2), 452-459 (2009). doi:10.1111/j.1551-2916.2008.02888.x

Weyant, C.M., Faber, K.T., Processing-Microstructure Relationships for Plasma-Sprayed Yttrium Aluminum Garnet. Surface and Coatings Technology 202 (24), 6081-6089 (2008). doi:10.1016/j.surfcoat.2008.07.008

Kardashev, B.K., Orlova, T.S., Smirnov, B.I., Wilkes, T.E., Faber, K.T., Elasticity and Inelasticity of the SiC/Al-13Si-9Mg Biomorphic Metal Ceramics. Physics of the Solid State 50 (10), 1882-1887 (2008). doi:10.1134/S1063783408100168

Wilkes, T.E., Pastor, J.Y., Llorca, J., Faber, K.T., Mechanical Properties of Wood-Derived Silicon Carbide Aluminum-Alloy Composites as a Function of Temperature. Journal of Materials Research 23 (6), 1732-1743 (2008). doi:10.1557/JMR.2008.0197

de Arellano-López, A.R, Martínez-Fernández, J., Varela-Feria, F.M., Sepúlveda, R., López-Robeldo, M.J., Llorca, J., Pastor, J.Y., Presas, M., Faber, K.T., Kaul, V.S., Pappacena, K.E., Wilkes, T.E., Processing, Microstructure and Mechanical Behavior of SiC-Based Ceramics via Naturally Derived Scaffolds. Mechanical Properties and Performance of Engineering Ceramics II: Ceramic Engineering and Science Proceedings 27 (2), 635-650 (2008). doi:10.1002/9780470291313.ch60

Faber, K.T., Weyant, C.M., Harder, B.J., Almer, J.D., Lee, K.N., Internal Stresses and Phase Stability in Multiphase Environmental Barrier Coatings. International Journal of Materials Research 98 (12), 1188-1195 (2007). doi:10.3139/146.101590

Pappacena, K.E., Faber, K.T., Wang, H., Porter, W.D., Thermal conductivity of porous silicon carbide derived from wood precursors. Journal of the American Ceramic Society 90 (2), 2855-2862 (2007). doi:10.1111/j.1551-2916.2007.01777.x

Seitz, M.E., Burghardt, W.R., Faber, K.T., Shull, K.R., Self-assembly and stress relaxation in acrylic triblock copolymer gels. Macromolecules 40 (4), 1218-1226 (2007). doi:10.1021/ma061993+

Casadio, F., Xu, J., Pearlstein, E., Faber, K.T., Knowles, A., Zhichung, J., A chinese stone kneeling figure in the Art Institute of Chicago: new evidence from archaeological finds and scientific investigations. Studies of the Sculptural Arts of Asia Using Scientific Methods, J. Douglas, Ed., Archetype Press (2006).

Kaul, V.S., Faber, K.T., Sepúlveda, R., de Arellano-López, A.R, Precursor selection and its role in the mechanical properties of porous SiC derived from wood. Materials Science and Engineering, A 428, 225-232 (2006). doi:10.1016/j.msea.2006.05.033

Weyant, C.M., Faber, K.T., Almer, J.D., Guiheen, J.V., Residual stress and microstructural evolution in environmental barrier coatings of tantalum oxide alloyed with aluminum oxide and lanthanum oxide. Journal of the American Ceramic Society 89 (3), 971-978 (2006). doi:10.1111/j.1551-2916.2005.00830.x

Kaul, V.S., Faber, K.T., Synthetic crossed-lamellar microstructures in oxide ceramics. Journal of Ceramic Processing Research 6 (3), 218-222 (2005).

Weyant, C.M., Faber, K.T., Almer, J.D., Guiheen, J.V., Residual stress and microstructural evolution in tantalum oxide coatings on silicon nitride. Journal of the American Ceramic Society 88 (8), 2169-2176 (2005). doi:10.1111/j.1551-2916.2005.00396.x

Montgomery, J.K., Faber, K.T., Processing and surface flaw tolerance of alumina bilayers. Journal of the American Ceramic Society 88 (2), 287-292 (2005). doi:10.1111/j.1551-2916.2005.00073.x

2000 - 2004

Moldovan, M., Weyant, C.M., Johnson, D.L., Faber, K.T., Tantalum oxide coatings for candidate environmental barriers. Journal of Thermal Spray Technology 13 (1), 51-56 (2004). doi:10.1361/10599630418103

Su, Y.J., Trice, R.W., Faber, K.T., Wang, H., Porter, W.D., Thermal conductivity, phase stability and oxidation resistance of Y3Al5O12 (YAG/Y2O3-ZrO2 YSZ) thermal barrier coatings. Oxidation of Metals 61 (3-4), 253-271 (2004).

Anderson, I.E., Schwartz, L.H., Faber, K.T., Slade Cargill, G., Houston, B., Materials education: opportunities over a lifetime. A report on the 17th Biannual Conference of National Materials Policy. Journal of Materials Education 24 (1-3), 1-17 (2003). Non-refereed conference proceeding

Montgomery, J.K., Botha, A.S., Drzal, P.L., Shull, K.R., Faber, K.T., A thermoreversible gelcasting technique for ceramic laminates. Scripta Materialia 40, 785-789 (2003). doi:10.1016/S1359-6462(02)00517-1

Gaies, D., Faber, K.T., The thermal properties of pitch-derived graphite foam. Carbon 40 (7), 1137-1140 (2002). doi:10.1016/S0008-6223(02)00099-4

Montgomery, J.K., Drzal, P.L., Shull, K.R., Faber, K.T., Thermoreversible gelcasting: a novel ceramic processing technique. Journal of the American Ceramic Society 85 (5), 1164-1168 (2002). doi:10.1111/j.1151-2916.2002.tb00239.x

Trice, R.W., Su, Y.J., Mawdsley, J.R., Faber, K.T., de Arellano-López, A.R., Wang, H., Porter, W.D., Effect of heat treatment on phase-stability, microstructure, and thermal conductivity of plasma-sprayed YSZ. Journal of Materials Science 37, 2359-2365 (2002). doi:10.1023/A:1015310509520

Su, Y.J., Bernecki, T.F., Faber, K.T., In-situ characterization of small-particle plasma-sprayed powders. Journal of Thermal Spray Technology 11 (1), 52-61 (2002). doi:10.1361/105996302770348970

Trice, R.W., Batson, C., Scharf, C., Faber, K.T., The role of starting powder size on the compressive response of stand-alone plasma-sprayed alumina coatings. Journal of Materials Science 37, 629-636 (2002). doi:10.1023/A:1013738112206

Zimmerman, M.H., Baskin, D.M., Faber, K.T., Fuller Jr., E.R., Allen, A.J., Keane, D.T., Fracture of a textured anisotropic ceramic. Acta Materialia 49, 3231-3242 (2001). doi:10.1016/S1359-6454(01)00224-5

Hovis, D.B., Faber, K.T., Textured microstructures in barium hexaferrite by magnetic field assisted gelcasting and templated grain growth. Scripta Materialia 44, 2525-2529 (2001). doi:10.1016/S1359-6462(01)00957-5

Faber, K.T., Microstructural toughening of ceramics. Encyclopedia of Materials: Science and Technology, Volume 2, pp. 1108-1113, Jürgen Buschow, K.H., et al., eds. Elsevier Science Ltd, Oxford (2001). Invited Publication

Mawdsley, J.R., Su, Y.J., Faber, K.T., Bernecki, T.F., Optimization of small-particle plasma-sprayed alumina coatings using designed experiments. Materials Science and Engineering: A 308, 189-199 (2001). doi:10.1016/S0921-5093(00)01992-4

Su, Y.J., Wang, H., Porter, W.D., de Arellano-López, A.R., Faber, K.T., Thermal conductivity and phase evolution of plasma-spreayed multilayer coatings. Journal of Materials Science 36, 3511-3518 (2001). doi:10.1023/A:1017932617123

Easley, T.C., Shah, S.P., Faber, K.T., Moiré interferometry analysis of fiber debonding. Journal of Engineering Mechanics 127 (6), 625-629 (2001). doi:10.1061/(ASCE)0733-9399(2001)127:6(625)

Torrents, J.M., Easley, T.C., Faber, K.T., Mason, T.O., Shah, S.P., Evolution of impedance spectra during debonding and pullout of single steel fibers from cement. Journal of the Amercian Ceramic Society 84 (4), 740-746 (2001). doi:10.1111/j.1151-2916.2001.tb00735.x

Trice, R.W., Prine, D.W., Faber, K.T., Deformation mechanisms in compression-loaded stand-alone plasma-sprayed alumina coatings. Journal of the American Ceramic Society 83 (12), 3057-3064 (2000). doi:10.1111/j.1151-2916.2000.tb01682.x

de Arellano López, A.R., Chiou, W.A., Faber, K.T., Estudio comparativo de tecnicas de preparaction de muestras de recubimientos ceramicas proyectados por plasma para microscopia electronica de transmision (Comparative study of TEM sample preparation techniques for plasma-sprayed ceramic coatings). Boletin de la Sociedad Española de Cerámica y Vidrio 39 (6), 735-740 (2000).

Montgomery, J., Faber, K.T., Processing of stepped-density alumina via gelcasting and reaction bonding techniques. Scripta Materialia 42, 283-287 (2000). doi:10.1016/S1359-6462(99)00342-5

Trice, R.W., Brewer, L.N., Faber, K.T., The Dissociation of NZP (Ca0.5Sr0.5Zr4P6O24) During Plasma Spraying. Scripta Materialia 42, 855-860 (2000). doi:10.1016/S1359-6462(00)00303-1

Boling-Risser, M.A., Goretta, K.C., Routbort, J.L., Faber, K.T., Effect of Microstructure on the High-Temperature Compressive Creep Behavior of Self-Reinforced Hot-Pressed Silicon Nitride. Journal of the American Ceramic Society 83 1 [12] 3065-69 (2000). doi:10.1111/j.1151-2916.2000.tb01683.x

Trice, R.W., Faber, K.T., The Role of Lamellae Morphology on the Microstructural Development and Mechanical Properties of Small-Particle Plasma-Sprayed Alumina. Journal of the American Ceramic Society 83 [4] 889-96 (2000). doi:10.1111/j.1151-2916.2000.tb01290.x

1995 - 1999

Allen, A.J., Fuller, E.R., Faber, K.T., Zimmerman, M.H., Wallace, J.S., Anisotropic Small-Angle Neutron Scattering Studies of Ceramics. Advanced Materials for the 21st Century: The 1999 Julia R. Weertman Symposium, edited by Chung, Y.W., Dunand, D.C., Liaw, P.K., Olson, G.B., TMS, 1999.

Trice, R.W., Su, Y. J., Faber, K.T., Wang, H., Porter, W., The Role of NZP Additions in Plasma-Sprayed YSZ: Microstructure, Thermal Conductivity and Phase Stability Effects. Materials Science and Engineering, A 272 [2] 284-91 (1999). doi:10.1016/S0921-5093(99)00468-2

Easley, T.C., Faber, K.T., Shah, S.P., Use of Crack-Bridging Single Fiber Pullout Test to Study Steel Fiber/Cementitious Matrix Composites. Journal of the American Ceramic Society 82 [12] 3513-20 (1999). doi:10.1111/j.1151-2916.1999.tb02274.x

de Arellano-López, A.R., Faber, K.T., Microstructural Characterization of Small-Particle Plasma Spray Coatings. Journal of the American Ceramic Society 82 [8] 2204-2208 (1999). doi:10.1111/j.1151-2916.1999.tb02063.x

Tandon, S., Faber, K.T., Effects of Loading Rate on the Fracture of Cementitious Materials. Cement and Concrete Research, 29 [3] 397-406 (1999). doi:10.1016/S0008-8846(98)00223-3

Gonczy, S.T., Faber, K.T., CERASET™ and BLACKGLAS™ Mini-Tow Composites with Carbon-Coated NICALON™ Tows. Ceramic Transactions Vol. 96, American Ceramic Society Singh, J.P., Bansal, N.P. eds. (1998).

de Arellano López, A.R., Faber, K.T., Morfología Granular Y Microestructura de Recumbrimientos Cerámicos de Grano Fino Proyectados Por Plasma (SPPS). Propiedades Mecanicas de Solidos, Pajares, A., et al., eds. (1998).

de Arellano López, A.R., Chiou, W.-A., Faber, K.T., Comparison of Focused Ion Beam and Conventional Techniques on TEM Specimen Preparation of Metal-Ceramic Interfaces. Microscopy and Microanalysis 4 860-61 (1998).

Gonczy, S.T., Oba, K., Faber, K.T., Strength and Stability Studies on Mini-Tow Ceramic Composites Made with Nitrided Nexel 312 Fibers and Silicon Oxycarbide. Ceramic Engineering and Science Proceedings 19 [3] 147-54 (1998). doi:10.1002/9780470294482.ch17

Saigal, A. Fuller, E.R., Langer, S.A., Carter, W.C., Zimmerman, M.H., Faber, K.T., Effect of Interface Properties on Microcracking of Iron Titanate. Scripta Materialia 38 [9] 1449-1453 (1998). doi:10.1016/S1359-6462(98)00040-2

Tandon, S., Faber, K.T., The Influence of Loading Rate on Crack Bridging Processes in Al2O3. Acta Materialia 46 [10] 3547-55 (1998). doi:10.1016/S1359-6454(98)00023-8

Baskin, D.M., Faber, K.T., Ohtsuka, H., Forming Tough, Single Phase Laminates of Fe2TiO5 via Magnetic-Assisted Gelcasting. Journal of the Japanese Institute of Metals and Materials 61 [12] 1306-10 (1997).

Baskin, D.M., Zimmerman, M.H., Fuller, E.R., Faber, K.T., Forming Single Phase Laminates via the Gelcasting Technique. Journal of the American Ceramic Society 80 [11] 2929-32 (1997). doi:10.1111/j.1151-2916.1997.tb03213.x

Zimmerman, M.H., Faber, K.T., Fuller, E.R., Forming Textured Microstructures via the Gelcasting Technique. Journal of the American Ceramic Society 80 [10] 2725-29 (1997). doi:10.1111/j.1151-2916.1997.tb03184.x

Gonczy, S.T., Sprandel, R.C., Faber, K.T., Tensile Tests of Miniature Fiber Reinforced Ceramic Composites for Screening Process-Property Relations. Ceramic Engineering and Science Proceedings 18 [3] 729-36 (1997). doi:10.1002/9780470294437.ch79

Faber, K.T., Ceramic Composite Interfaces: Properties and Design. Annual Review of Materials Science 27, 499-524 (1997). Invited publication. doi:10.1146/annurev.matsci.27.1.499

Knepfler, C.A., Faber, K.T., Weertman, K, Olson, G.B., Hubbard, C.R., Cavin, O.B., Packen, N., High Temperature Stability and Thermal Expansion Behavior of Molybdenum/Chromium M2C Carbides. Journal of Alloys and Compunds 248 [1-2] 139-42 (1997). doi:10.1016/S0925-8388(96)02442-5

Jin, D.S., Husmann, A, Rosenbaum, T.F., Steyer, T.E., Faber, K.T., Controlled Symmetry Breaking in Superconducting UPt3. Physical Review Letters 78 [9] 1775-78 (1997). doi:10.1103/PhysRevLett.78.1775

Christensen, R.J., Faber, K.T., Cyclic Fatigue of Reaction Bonded Silicon Nitride at Elevated Temperatures. Journal of Materials Science 32 [4] 949-55 (1997). doi:10.1023/A:1018509902025

Cazzato, A., Faber, K.T., Fracture Energy of Glass-Alumina Interfaces via the Bimaterial Bend Test. Journal of the American Ceramic Society 80 [1] 181-88 (1997). doi:10.1111/j.1151-2916.1997.tb02808.x

Day, P.S., Skamser, D.J., Faber, K.T., Jennings, H.M., Johnson, D.L., Damage Tolerance of Silicon Carbide- and Alumina-Matrix Surface Composites. Journal of the American Ceramic Society 79 [4] 1117-20 (1996). doi:10.1111/j.1151-2916.1996.tb08558.x

Zimmerman, M.H., Faber, K.T., Fuller, E.R., Kruger, K.L., Bowman, K.J., Texture Assessment of Magnetically Processed Iron Titanate. Journal of the American Ceramic Society 79 [5] 1389-93 (1996). doi:10.1111/j.1151-2916.1996.tb08600.x

Tandon, S., Faber, K.T., On Loading Rate Effects in Toughening Processes. Scripta Materialia 34 [5] 757-762 (1996). doi:10.1016/1359-6462(95)00586-2

Paulik, S.W., Zimmerman, M.H., Faber, K.T., Fuller, E.R., Residual Stress in Ceramics with Large Thermal Expansion Anisotropy. Journal of Materials Research 11 [11] 2795-2803 (1996). doi:10.1557/JMR.1996.0354

Christensen, R.J., Faber, K.T., Room Temperature Cyclic Fatigue of Reaction Bonded Silicon Nitride Using the Double Cleavage Drilled Compression Specimen. Journal of the American Ceramic Society 79 [2] 425-29 (1996). doi:10.1111/j.1151-2916.1996.tb08139.x

Tandon, S., Faber, K.T., Fracture of Brittle and Quasi-Brittle Engineering Materials. Cements Research Progress, 1995 American Ceramics Society. Invited publication.

Tandon, S., Faber, K.T., Bazant, Z.P., Li, Y.N., Cohesive Crack Modeling of Influence of Sudden Changes in Loading Rate on Concrete Fracture. Engineering Fracture Mechanics 52 [6] 987-997 (1995). doi:10.1016/0013-7944(95)00080-F

Tandon, S, Faber, K.T., Bazant, Z.P., Crack Stability in the Fracture of Cementitious Materials. MRS Proceedings 370, 387-396 (1995). doi:10.1557/PROC-370-387

Steyer, T.E., Faber, K.T., Drory, M.D., Fracture Strength of Free Standing CVD Diamond Films. Applied Physics Letters 66 [23] 3105-07 (1995). doi:10.1063/1.113617

Mumm, D.R., Faber, K.T., Interfacial Debonding and Sliding in Brittle Matrix Composites Measured Using an Improved Fiber Pullout Technique. Acta Metallurgica et Materialia 43 [3] 1259-1270 (1995). doi:10.1016/0956-7151(94)00294-R

Steyer, T.E., Faber, K.T., Mechanical Behavior of Alumina Reinforced with Carbon Coated SiC Whiskers. Journal of the American Ceramic Society 78 [10] 2673-79 (1995). doi:10.1111/j.1151-2916.1995.tb08039.x

Gu, W.H., Faber, K.T., Tensile Behavior of Microcracking SiC TiB2. Journal of the American Ceramic Society 78 [6] 1505-1512 (1995). doi:10.1111/j.1151-2916.1995.tb08845.x

Bazant, Z.P., Gu, W.H., Faber, K.T., Softening Reversal and Other Effects of a Change in Loading Rate on Fracture of Concrete. ACI Materials Journal 92 [1] 3-9 (1995). doi:10.14359/1171

1990 - 1994

Faber, K.T., Mumm, D.R., Interface Design in Brittle Brittle Systems. High Performance Composites: Commonalty of Phenomena, Chawla, K.K., Liaw, P.K., Fishman, S.G., eds., TMS (1994). Invited publication.

Mumm, D.R., Faber, K.T., Effects of Reinforcement Surface Morphology on Toughening of Brittle Matrix Composites. High Performance Composites: Commonalty of Phenomena, Chawla, K.K., Liaw, P.K., Fishman, S.G., eds., TMS (1994).

Paulik, S.W., Faber, K.T., Fuller, E.R., Development of Textured Microstructures in Ceramics with Large Thermal Expansion Anisotropy. Journal of the American Ceramic Society 77 [2] 454-58 (1994). doi:10.1111/j.1151-2916.1994.tb07014.x

Mumm, D.R., Faber, K.T., Micro Mechanical Aspects of Fiber Debonding and Frictional Sliding in Brittle Matrix Composites. Ceramic Transactions, Vol 38, Advances in Ceramic Matrix Composites, Bansal, N.P., ed., American Ceramic Society (1993).

Cazzato, A., Faber, K.T., Multiple Cracking and Interface Debonding in a Brittle Film on a Ductile Rod. Ceramic Transactions, Vol. 38, Advances in Ceramic Matrix Composites, Bansal, N.P., ed, American Ceramic Society (1993).

Steyer, T.E., Faber, K.T., DCB Methods for Examining Toughening in Alumina Reinforced with Carbon Coated SiC Whiskers. Ceramic Transactions, Vol. 38, Advances in Ceramic Matrix Composites, Bansal, N.P., ed, American Ceramic Society (1993).

Jordan, D.W., Faber, K.T., X-ray Residual Stress Analysis of a Ceramic Thermal Barrier Coating Undergoing Thermal Cycling. Thin Solid Films 253, 137 41 (1993). doi:10.1016/0040-6090(93)90256-O

Cai, H., Faber, K.T., Effective Dilatational Transformation Toughening in Brittle Materials. Scripta Metallurgica et Materialia 28 [9] 1161 66 (1993). doi:10.1016/0956-716X(93)90027-P

Mumm, D.R., Faber, K.T., Drory, M.D., Gardinier, C.F., High Temperature Hardness of Chemically Vapor Deposited Diamond. Journal of the American Ceramic Society 76 [1] 238 40 (1993). doi:10.1111/j.1151-2916.1993.tb03716.x

Cai, H., Faber, K.T., Fuller, E.R., Crack Bridging by Inclined Fibers/Whiskers in Ceramic Composites. Journal of the American Ceramic Society 75 [11] 3111 17 (1992). doi:10.1111/j.1151-2916.1992.tb04395.x

Gu, W.H., Faber, K.T., Steinbrech, R.W., Microcracking and R Curve Behavior in Microcracking SiC TiB2 Composites. Acta Metallurgica et Materialia 40 [11] 3121 28 (1992). doi:10.1016/0956-7151(92)90475-T

Mumm, D.R., Faber, K.T., Fiber Debonding and Pullout Processes in Ceramic Composites. Ceramic Engineering and Science Proceedings 13 [7/8] 70 77 (1992). doi:10.1002/9780470313954.ch8

Steyer, T.E., Faber, K.T., Fracture Behavior of SiC Whisker Reinforced Al2O3 with Modified Interfaces. Ceramic Engineering and Science Proceedings 13 [9/10] 669 677 (1992). doi:10.1002/9780470313978.ch11

Kilius,D., Faber, K.T., Process Zone Formation in a Cement Aggregate Composites. Journal of Materials Science Letters 11 [17] 1167 69 (1992). doi:10.1007/BF00730273

Cai, H., Faber, K.T., On the Use of Approximation Methods for Microcrack Shielding Problems. Journal of Applied Mechanics 59 [3] 497 501 (1992). doi:10.1115/1.2893751

Baker, T.L., Faber, K.T., Readey, D.W., Ferroelastic Toughening in Bismuth Vanadate. Journal of the American Ceramic Society 74 [7] 1619 23 (1991). doi:10.1111/j.1151-2916.1991.tb07148.x

Cai, H., Moran, B., Faber, K.T., Analysis of a Microcrack Prototype and Its Implications for Microcrack Toughening. Journal of the American Ceramic Society 74 [7] 1695 98 (1991). doi:10.1111/j.1151-2916.1991.tb07164.x

Faber, K.T., Gu, W.H., Cai, H., Winholtz, R.A., Magley, D.J., Fracture Properties on SiC Based Particulate Composites. Proceedings of the NATO Advanced Research Workshop on Toughening Mechanisms in Quasi Brittle Materials, Shah, S., ed., Kluwer Academic Publishers (1991). Invited publication.

Cai, H., Gu, W.H., Faber, K.T., Microcrack Toughening in a SiC TiB2 Composite. Proceedings of the American Society for Composites 5th Technical Conference on Composite Materials (1990). Invited publication.

Magley, D.J., Winholtz, R.A., Faber, K.T., Residual Stresses in Microcracking Ceramics. Journal of the American Ceramic Society 73 [6] 1641 44 (1990). doi:10.1111/j.1151-2916.1990.tb09808.x

Conner, C., Faber, K.T., Segregant Enhanced Fracture in Magnesium Oxide. Journal of Materials Science 25 [6] 2737 42 (1990). doi:10.1007/BF00584873

1985 - 1989

Goettler, R.W., Faber, K.T., Interfacial Shear Stresses in Fiber Reinforced Glasses. Composites Science and Technology 37, 129 147 (1989). doi:10.1016/0266-3538(90)90096-N

Rai, R.S., Guruswamy, S., Hirth, J.P., Faber, K.T., Dislocation Structures in In-doped and Undoped GaAs Deformed at 700 1100C. Philosophical Magazine A 60 [3] 339 53 (1989).

Guruswamy, S., Rai, R.S., Faber, K.T., Hirth, J.P., Clemans, J.E., McGuigan, S., Thomas, R.N., Mitchel, W., Influence of Solute Doping on the High Temperature Deformation Behavior of GaAs. Journal of Applied Physics 65 [6] 2508 12 (1989). doi:10.1063/1.342797

Goettler, R.W., Faber, K.T., Interfacial Shear Stresses in SiC and Al2O3 Fiber Reinforced Glasses. Ceramic Engineering and Science Proceedings 9 [7/8] 861 70 (1988). doi:10.1002/9780470310496.ch37

Rai, R.S., Guruswamy, S., Faber, K.T., Hirth, J.P., TEM Studies of Dislocations in Deformed Ga1-xInxAs Single Crystals. Proceedings of the 48th Annual Meeting of the Electron Microscopy Society of America, Bailey, G.W., ed., San Francisco Press (1988).

Faber, K.T., Hickenbottom, C.C., Embrittlement in Ceramics. MRS Symposium Proceedings 122, 475- 83 (1988).

Faber, K.T., Iwagoshi, T., Ghosh, A., Toughening by Stress Induced Microcracking in Two Phase Ceramics. Journal of the American Ceramic Society 71 [9] C 399 C 401 (1988). doi:10.1111/j.1151-2916.1988.tb06419.x

Faber, K.T., Toughening in ZrO2 Based Materials. Advanced Ceramics, Saito, S., ed., Ohmsha, Ltd./Oxford University Press (1988). Invited publication.

Guruswamy, S., Rai, R.S., Faber, K.T., Hirth, J.P., Deformation Behavior of Undoped and In-doped GaAs in the Temperature Range 700C to 1100C. Journal of Applied Physics 62 [10] 4130 34 (1987). doi:10.1063/1.339129

Shaw, M.C., Faber, K.T., Temperature Dependent Toughening in Whisker Reinforced Ceramics. Ceramic Microstructures '86: Role of Interfaces, Pask, J.A., Evans, A.G., eds., Plenum Press (1987). doi:10.1007/978-1-4613-1933-7_92

Faber, K.T., Kerans, R.J., Options for Low Thermal Expansion Coatings for Carbon/Carbon Composites. Proceedings, 1987 Joint NASA/DoD Conference on Metal Matrix, Carbon, and Ceramic Matrix Composites, Metals and Ceramic Information Center (1987).

Rai, R.S., Faber, K.T., Guruswamy, S., Hirth, J.P., Transmission Electron Microscopy Studies in Deformed Ga1-xInnAs. Proceedings, 45th Ann Meeting EMSA, Bailey, G.W., San Francisco Press, Inc., (1987).

Clarke, D.R., Faber, K.T., Fracture of Ceramics and Glasses. Journal of Physics and Chemistry of Solids 47 [11] 1115 57 (1987). Invited publication

Bowling, G.D., Faber, K.T., Hoagland, R.G., Computer Simulations of R-Curve Behavior in Microcracking Materials. Journal of the American Ceramic Society 70 (11) 849 54 (1987). doi:10.1111/j.1151-2916.1987.tb05639.x

Guruswamy, S., Hirth, J.P., Faber, K.T., High Temperature Hardness of Ga1-xInxAs. Journal of Applied Physics 60 [12] 4136 40 (1986). doi:10.1063/1.337495

Guruswamy, S., Hirth, J.P., Faber, K.T., Mechanical Properties of Ga1-xInxAs. MRS Symposium Proceedings 56, 329– 35 (1986).

Godard, H.T., Faber, K.T., Surface Energy as an Indicator of Interfacial Mechanical Response. Tailoring Multiphase and Composite Ceramics, Proceedings of the 21st University Conference on Ceramic Science, Tressler, R.E., Messing, G.L., Pantano, C.G., Newnham, R.E., eds., Plenum Press (1986).

Faber, K.T., Advani, S.H., Lee, J.K., Jinn, J.T., Frictional Stress Evaluation Along the Fiber Matrix Interface in Ceramic Matrix Composites. Journal of the American Ceramic Society 69 [9] C 208 09 (1986). doi:10.1111/j.1151-2916.1986.tb07480.x

Johnson-Walls, D., Drory, M.D., Evans, A.G., Marshall, D.B., Faber, K.T., Evaluating Reliability in Brittle Components by Thermal Stress Testing. Journal of the American Ceramic Society 68 [7] 363 67 (1985). doi:10.1111/j.1151-2916.1985.tb10143.x

1980 - 1984

Faber, K.T., Microcracking Contributions to the Toughness of ZrO2 Based Materials. Advances in Ceramics, Volume 12, Claussen, N., Ruhle, M., Heuer, A.H., eds., American Ceramic Society (1984).

Evans, A.G., Faber, K.T., The Crack Growth Resistance of Microcracking Brittle Materials. Journal of the American Ceramic Society 67 [4] 255 60 (1984). doi:10.1111/j.1151-2916.1984.tb18842.x

Faber, K.T., Toughening of Ceramic Materials for Automotive Applications. Ceramic Engineering and Science Proceedings 5 [5] 408 39 (1984). doi:10.1002/9780470320211.ch12

Faber, K.T., Evans, A.G., Intergranular Crack Deflection Toughening in Silicon Carbide. Journal of the American Ceramic Society 66 [6] C94 96 (1983). doi:10.1111/j.1151-2916.1983.tb10084.x

Faber, K.T., Evans, A.G., Crack Deflection Processes II. Experiment. Acta Metallurgica 31 [4] 577 84 (1983). doi:10.1016/0001-6160(83)90047-0

Faber, K.T., Evans, A.G., Crack Deflection Processes I. Theory. Acta Metallurgica 31 [4] 565 76 (1983). doi:10.1016/0001-6160(83)90046-9

Van Tendeloo, G., Faber, K.T., Thomas, G., Characterization of AlN Ceramics Containing Long Period Polytypes. Journal of Materials Science 18 [2] 525 532 (1983). doi:10.1007/BF00560642

Faber, K.T., Evans, A.G., Drory, M.D., A Statistical Analysis of Crack Deflection as a Toughening Mechanism in Ceramic Materials. Fracture Mechanics of Ceramics, Volume 6, Bradt, R.C., Evans, A.G., Hasselman, D.P.H., Lange, F.F., eds., Plenum Publishing Company (1982).

Rindone, G.E., Faber, K.T., Kumar, B., Olix, W.F., Sproull, J.F., Glass Microstructure Characterization by Laser Light Scattering, Small Angle X-Ray Scattering and Electron Microscopy. Journal of Non-Crystalline Solids 49, 253 62 (1982). doi:10.1016/0022-3093(82)90123-5

Evans, A.G., Faber, K.T., Toughening of Ceramics by Circumferential Microcracks. Journal of the American Ceramic Society 64 [7] 394 97 (1981). doi:10.1111/j.1151-2916.1981.tb09877.x

Faber, K.T., Huang, M.D., Evans, A.G., Quantitative Studies of Thermal Shock Based Upon a Novel Test Technique. Journal of the American Ceramic Society 64 [5] 295 301 (1981). doi:10.1111/j.1151-2916.1981.tb09606.x

Faber, K.T., Rindone, G.E., Small Angle X-ray Scattering and Transmission Electron Microscopy of Water Containing Phase Separated Soda Lime Silica Glasses. Physics and Chemistry of Glasses 21 [5] 171 77 (1980).

1977 - 1979

Coppola, J.A., Srinivasan, M., Faber, K.T., Smoak, R.H., High Temperature Properties of SiC. Proceedings of the International Symposium on Sintering and Densification of Non Oxide Materials, Somiya, S., Saito, S., eds., Association for Science Documents Information (1979).

Faber, K.T., Landingham, R.L., The Separation, Identification and Characterization of Radioactive Particles in Topsoil. Powder Technology 16 [2] 209 16 (1977). doi:10.1016/0032-5910(77)87008-3